Product Description
About the Dial 3063
A safe and high-quality cooling pad made to deliver effective cooling for a variety of evaporative coolers!
The Dial 3063 Dura-Cool pre-cut pad is constructed of natural aspen wood fibers and high-efficiency foamed polyester that have been cross-laminated and fused to create a thick, long-lasting pad. It has a honeycomb-like construction that enhances the surface area and permits effective water and air flow, which boosts cooling effectiveness. The pad's pre-cut construction assures a perfect fit for your evaporative cooler and makes installation and replacement both quick and painless. It has no odor and is non-allergic. Additionally, unlike other pads, it won't shed fiber.
This Dial 3063 Dura-Cool pre-cut pad is treated with a special resin that helps to prevent the growth of bacteria and other microorganisms, ensuring that the air passing through the cooler is pure and hygienic. It has a thickness of approximately 1 inch, which provides a large surface area for effective cooling and humidification of the air passing through it.
The Dial 3063 Dura-Cool pre-cut pad is created to be extremely long-lasting and sturdy, offering dependable performance for a considerable amount of time.
Dial Manufacturing, Inc. has been committed to providing high-quality portable evaporative coolers, replacement parts, and accessories for over 50 years. Purchase your Dial 3063 Dura-Cool pre-cut pad from Plumberstock today!
PlumbersStock is a one-stop shop for all of your heating and cooling needs.
Product Details
| Manufacturer: | Dial |
| Product: | Cooler Pads |
| Product Type: | Evaporative Cooler Parts |
| Color: | Blue |
| Length: | 33" |
| Width: | 25" |
| Material: | Polyester |
| Shape: | Rectangle |
| Type: | Replacement Part |
| Mpn # | 3063 |
| Weight | 0.80 lbs. |
Product Features
- Long-Lasting Durability: The natural aspen wood fibers are treated with a special bonding agent that helps to prevent degradation, extending the life of the pad.
- High Cooling Efficiency: The honeycomb-like design of the pad maximizes the surface area and allows for efficient water and air flow, which increases the cooling efficiency.
- Easy To Install: It ensures a perfect fit for your evaporative cooler, and it can be easily installed or replaced with minimal hassle. This makes the maintenance and upkeep of your cooling system a breeze.
- Environmentally Friendly: The Dial Dura-Cool Pre-Cut Pad is made of natural aspen wood fibers, which are a renewable resource and environmentally friendly. This makes it a great choice for those who are conscious of their impact on the environment.
- Versatile: This pre-cut pad is available in a variety of sizes to fit a wide range of evaporative cooler models. This makes it a versatile cooling solution that can be used in residential, commercial, and industrial settings.
- Size: The Dial 3063 Dura-Cool pre-cut pads measure 24 by 40 inches.
INSTALLATION INSTRUCTIONS:
1. Remove old pad from cooler. Clean pad frame, pad retainer and bottom pan.
2. Place pad into frame. Fit should be snug from top to bottom and from
side to side. Cut to fit, do not fold at top. If cutting is necessary, use
scissors. Never cut pad size too small. For a good snug fit, allow for at
least an extra 1/4" of pad material on each side from top to bottom and
from side to side.
For Metal coolers with water slots toward the outside of the cooler:
Make sure the top edge of the pad covers the entire trough height.
See illustration.
For Plastic coolers with water slots toward the inside of the cooler:
Make sure the top edge of the pad covers half of the height of each water slot in the
distribution trough. See illustration.
3. Reinstall the pad retainer rack to hold the DURA-COOL™ pad firmly against the
pad frame and against the water trough.
4. Precondition each pad with a light rinse by using a garden hose with
very light thumb pressure.
5. If necessary, adjust the flow of water to the DURA-COOL™ pad using a pump hose restrictor clamp to
decrease the flow. The DURA-COOL™ pad must receive enough water to feel like a very wet sponge.
Excessive water flow on pads may damage cooler parts and air ducts.
IMPORTANT:
• DURA-COOL™ pads must fit properly into cooler pad frame with no open spaces or holes.
• Excessive water flow on pads may allow droplets to enter cooler duct. If needed, decrease water flow by using
a pump hose restrictor clamp.
• Install a purge pump or water bleed off line to reduce the formation of mineral deposits.
• Turn cooler off during very high winds.
